[CompactPCI 3U] [CompactPCI 6U] [CompactPCI H110BUS [CompactPCI  birdge]

CompactPCI 3U
   

 

AcPC8630

Mix and match plug-in modules with different I/O functions to quickly create custom I/O boards.

CompactPCI®, Nonintelligent, 3U IP Carrier Card

The AcPC8630 is a nonintelligent slave board that interfaces two IP modules to the CompactPCI® (cPCI) bus. All 100 I/O points are brought out the front connectors for easy cable access.

Features

  • Two industry-standard IP module slots
  • Board resides in memory space
  • Supports IP module I/O, ID and INT spaces
  • 100 I/O points with front access
  • High-density front connectors 
  • Compatible with all CompactPCI CPUs
  • Compatible with 32-bit and 64-bit CompactPCI® and PXI™ backplane
  • Plug-and-play carrier configuration and interrupt support
  • Two interrupt channels per IP module
  • Front panel LEDs
  • Supervisory circuit for reset generation
  • Individually filtered and fused power to each IP
  • Ruggedized with ESD strip and EMC front panel
  • Easily integrate IPs with your software using RTOS VxWorks, WNX, Linux, or Win DLL for Windows® 95/98/2000/XP 

 ELMA's cPCI backplane family covers a wide range of options to connect all available PSUs. Up to 5 slot can be offert with a clock frequency of 66 MHz. versions The stable operation of your system can be monitored using ELMA's System Monitor that continuously measures internal chassis parameters indicated healthy by LEDs. Two or three cPCI backplanes (10 to max 21 slots) can be linked using the ELMA's cPCI Bridge module on the rear.

• Compliant with PICMG 2.0 R3.0 CPCI Core Specification
• System slot right or left
• Modular power system
• Shrouds: P2 (only for 32 bit Backplanes)
• 2 slot 8-layer construction; 3-8 slot 10-layer construction
• Number of slots: 2-8
• 10-21 slots available with cPCI to cPCI Bridge
• Connector for status signals "FCON"
• PCB height: 128.7 mm
• PCB thickness 3.2 mm

 
CompactPCI 6U
ELMA's cPCI backplane family covers a wide range of options to connect all available PSUs. Up to 5 slot can be offert with a clock frequency of 66 MHz. The stable operation of your system can be monitored using ELMA's System Monitor that continuously measures internal chassis parameters indicated healthy by LEDs. Two or three cPCI backplanes (10 to max 21 slots) can be linked using the ELMA's cPCI Bridge module on the rear.
 
• Compliant with PICMG 2.0 R3.0 CPCI Core Specification
• System slot right or left
• Modular power system
• Shrouds: P3 to P5; P2 to P5 (only for 32 bit Backplanes)
• 2 slot 8-layer construction; 3-8 slot 10-layer construction
• Number of slots: 2-8
• 10-21 slots available with cPCI to cPCI Bridge
• Connector for status signals "FCON"
• PCB height: 262.05 mm
• PCB thickness: 4.4 mm

 
 CompactPCI with H.110 bus
ELMA's cPCI backplane family covers a wide range of options to connect all available PSUs. The stable operation of your system can be monitored using ELMA's System Monitor that continuously measures internal chassis parameters indicated healthy by LEDs. Two or three cPCI backplanes (10 to max 21 slots) can be linked using the ELMA's cPCI Bridge module on the rear.
 
• Compliant with PICMG 2.0 R3.0 CPCI Core Specification
• Compliant with PICMG 2.5 R.1.0 Computer Telephony Specification
• System slot right
• System slot can be isolated from H.110-bus (6 and 8 slot only)
• Modular power system
• Shrouds: P3 to P5; P2 to P5
• 10-layer construction
• Number of slots: 4, 6, 8 (others on request)
• Connector for status signals "FCON"
• PCB height: 262.05
• PCB thickness: 4.4 mm

 
CompactPCI with Bridge
Up to three backplanes can be connected together with the bridge. Therefore the number of slots can be increased up to 21 slots. No slots are occupied by the bridge module.
 
• In combination with Elma standard cPCI backplanes only
• Bridge module for the rear side of the backplane (pluggable)
• Supports +3.3 V or +5 V input (onboard voltage regulator)
• Provides 7 clock signals for the secondary backplane
• Bus width: 32/64 bit
• Based on the Intel PCI-to-PCI bridge
• 8-layer construction
• Automatic detection 32/64 bit systems
• PCB height: 128.7 mm (3 U); 262.05 (6U)
• PCB thickness: 3.2 mm (3 U); 4.4 mm (6 U)

 

  
CompactPCI Extender board (160mm)
The cPCI extender board supports the testing of daughter boards. It is plugged into the backplane in the slot for the daughter board. The daughter board is plugged onto the extender board outside the card cage, making it more easily accessible.
• To test peripheral cPCI boards
• 8-layer construction
• Compliant with PICMG 2.0 CompactPCI Specification Rev.3.0
• cPCI signals from P1 and P2 extended using PCI to PCI Bridge
• Based on the Intel PCI-to-PCI bridge fw21154be
• Bus frequency: 33MHz (standard) or 66MHz
• All pins from P3, P4 and P5 are routed 1:1
• Signals can be individually switched on/off via SMD switches
• Characteristic impedance 65 Ohm +/-10%
• Handles for insertion/extraction of the daughter card
• Two test points for each signal
• Table in Silkscreen showing the mapping of signals
• Access to GND, +3.3V, +5V, +12V, -12V via fastons
• VI/O voltage selectable between +3.3 and +5V

 
 cPCI Backplane with Low Profile Bridge
ELMAs Low Profile Bridge is the ideal solution for all 32 bit applications. The bridge covers the P1 area only without interfering the rear transition modules.
• All I/O positions can be used for Rear Transitions Modules
• In combination with Elma standard cPCI backplanes only
• Rear pallet module, low profile construction (pluggable)
• Right to left extension of CPCI bus segments
• All slots available on the front for cards
 
 
 
cPCI eXPAND Overlay Kit
 
• Cost effective upgrade for ELMA standard cPCI backplane to Gigabit Ethernet backplane according to PICMG 2.16
• Serial point to point links from switch module, via overlay module plugged on rear side of backplane, to each node slot of P3
• Topology: Dual Star Fabric
• Links implementation: 1000Mbs (4 differential pairs) links between fabric slot and each node (up to 2Gb/s full duplex)
• Protocol: Ethernet

 

  

eXTReMe Tracker